Dec-2023 Microsoft AZ-800 Actual Questions and Braindumps
AZ-800 Dumps To Pass Microsoft Exam in 24 Hours - Prep4away
NEW QUESTION # 54
You have an Active Directory domain that contains a file server named Server1. Server1 runs Windows Server and includes the file shares shown in the following table.
When users login to the network they receive the following network drive mappings.
* H: maps to Wserver1\users\%UserName%
* G: maps to \\server1\%Department%
You need to limit the amount of space consumed by user's on Server!. The solution must meet the following requirements:
* Prevent users using more than 5GB of space on their H: drive
* Prevent Accounts department users from using more than 10GB of space on the G: drive
* Prevent Marketing department users from using more than 15GB of space on the G: drive
* Prevent Customer Service department users from using more than 2GB of space on the G: drive
* Minimize administrative effort
What should you use?
- A. File Server Resource Manager (FSRM) quotas
- B. NTFS Disk quotas
- C. Storage tiering
- D. Group Policy Preferences
Answer: A
NEW QUESTION # 55
Your network contains a single domain Active Directory Domain Services (AD DS) forest named contoso.com. The forest contains a single Active Directory site.
You plan to deploy a read only domain controller (RODC) to a new datacenter on a server named Server1. A user named User1 is a member of the local Administrators group on Server1.
You need to recommend a deployment plan that meets the following requirements:
Ensures that a user named User1 can perform the RODC installation on Server1 Ensures that you can control the AD DS replication schedule to the Server1 Ensures that Server1 is in a new site named RemoteSite1 Uses the principle of least privilege Which three actions should you recommend performing in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
1 - Add User1 to the Contoso\Adminisitrator group.
2 - Pre-create an RODC account.
3 - Instruct User1 to run the Active Directory Domain Services installation Wizard on Server1.
NEW QUESTION # 56
You have an on-premises server named Server! that runs Windows Server.
You have an Azure subscription that contains a virtual network named VNet1.
You need to connect Server! to VNet1 by using Azure Network Adapter.
What should you use?
- A. Device Manager
- B. Azure AD Connect
- C. the Azure portal
- D. Windows Admin Center
Answer: D
NEW QUESTION # 57
You deploy a new Active Directory Domain Services (AD DS) forest named contoso.com. The domain contains three domain controllers named DC1, DC2, and DC3.
You rename Default-First-Site-Name as Site1.
You plan to ship DC1, DC2, and DC3 to datacenters in different locations.
You need to configure replication between DC1, DC2, and DC3 to meet the following requirements:
Each domain controller must reside in its own Active Directory site.
The replication schedule between each site must be controlled independently.
Interruptions to replication must be minimized.
Which three actions should you perform in sequence in the Active Directory Sites and Services console? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
1 - Create two additional sites....
2 - Create a connection object between DC1 and DC2.
3 - Create a connection object between DC2 and DC3.
NEW QUESTION # 58
You have a server named Server1 that hosts Windows containers. You plan to deploy an application that will have multiple containers. Each container will be You need to create a Docker network that supports the deployment of the application. Which type of network should you create?
- A. I2bridge
- B. transparent
- C. NAT
- D. I2tunnel
Answer: B
Explanation:
Reference:
https://docs.microsoft.com/en-us/virtualization/windowscontainers/container-networking/network-drivers-topolo
NEW QUESTION # 59
Drag and Drop Question
You have a server named Server1.
You plan to use Storage Spaces to expand the storage available to Server1. You attach eight physical disks to Server1. Four disks are HDDs and four are SSDs.
You need to create a volume on Server1 that will use the storage on all the new disks. The solution must provide the fastest read performance for frequently used files.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Explanation:
https://redmondmag.com/articles/2018/07/31/storage-spaces-windows-server-2016-1.aspx
https://redmondmag.com/articles/2018/08/02/storage-spaces-windows-server-2016-2.aspx
NEW QUESTION # 60
You have a server named Server1 that has Windows Admin Center installed. The certificate used by Windows Admin Center was obtained from a certification authority (CA).
The certificate expires.
You need to replace the certificate.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
1 - From Internet Information Services (IIS)....
2 - Copy the certificate thumbprint.
3 - Rerun Windows Admin Center Setup and select Change.
Reference:
https://www.starwindsoftware.com/blog/change-the-windows-admin-center-certificate
NEW QUESTION # 61
Which groups can you add lo Group3 and Groups? To answer, select the appropriate options in the answer area. NOTE Each correct selection is worth one point.
Answer:
Explanation:
Explanation
NEW QUESTION # 62
You have an on-premises Active Directory Domain Services (AD DS) domain that syncs with an Azure Active Directory (Azure AD) tenant
You have several Windows 10 devices that are Azure AD hybrid-joined.
You need to ensure that when users sign in to the devices, they can use Windows Hello for Business.
Which optional feature should you select in Azure AD Connect?
- A. Azure AD app and attribute filtering
- B. Directory extension attribute sync
- C. Group writeback
- D. Device writeback
- E. Password writeback
Answer: E
Explanation:
Reference:
https://docs.microsoft.com/en-us/windows/security/identity-protection/hello-for-business/hello-hybrid-cert-trust-prereqs
NEW QUESTION # 63
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory Domain Services (AD DS) forest. The forest contains three Active Directory sites named Site1, Site2, and Site3. Each site contains two domain controllers. The sites are connected by using DEFAULTIPSITELINK.
You open a new branch office that contains only client computers.
You need to ensure that the client computers in the new office are primarily authenticated by the domain controllers in Site1.
Solution: You create an organizational unit (OU) that contains the client computers in the new branch office. You configure the Try Next Closest Site Group Policy Object (GPO) setting in a GPO that is linked to the new OU.
Does this meet the goal?
- A. Yes
- B. No
Answer: B
Explanation:
https://docs.microsoft.com/en-us/windows-server/identity/ad-ds/plan/enabling-clients-to-locate- the-next-closest-domain-controller
NEW QUESTION # 64
You have a Windows Server container host named Server1 that has a single disk.
On Server1, you plan to start the containers shown in the following table.
Which isolation mode can you use for each container? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/virtualization/windowscontainers/manage-containers/hyperv-container
NEW QUESTION # 65
Your network contains an Active Directory Domain Services (AD DS) domain. The domain contains 10 servers that run Windows Server. The servers have static IP addresses.
You plan to use DHCP to assign IP addresses to the servers. You need to ensure that each server always receives the same IP address.
Which type of identifier should you use to create a DHCP reservation for each server?
- A. NetBIOS name
- B. fully qualified domain name (FQDN)
- C. universally unique identifier (UUID)
- D. MAC address
Answer: D
NEW QUESTION # 66
You plan w deploy an Azure virtual machine that win run Windows Server. The virtual machine will host an Active Directory Domain Services (AD DS) domain controller and a drive named f: on a new virtual disk.
You need to configure storage foe the virtual machine. The solution must meet the following requirements
* Maximize resiliency for AD DS.
* Prevent accidental data loss.
How should you configure the storage? To answer, select the appropriate options in the answer are a.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 67
You have an Active Directory Domain Services (AD DS) domain. The domain contains a member server named Server1 that runs Windows Server.
You need to ensure that you can manage password policies for the domain from Serve1.
Which command should you run first on Server1?
- A. Install-windows Feature RSAT-AWIMS
- B. Install-Windows Feature RSAT-AO-PowerShell
- C. Install-Windows Feature RSAT-AD-Tool$
- D. Install-Windows Feature 6PHC
Answer: C
NEW QUESTION # 68
You haw? a server named Host! that has the Hyper-V server role installed. Host! hosts a virtual machine named VM1.
You have a management server named Server! that runs Windows Server. You remotely manage Host1 from Server1 by using Hyper-V Manager.
You need to ensure that you can access a USB hard drive connected to Server1 when you connect to VM1 by using Virtual Machine Connection.
Which two actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
- A. From the Hyper-V Settings of Host1, select Allow enhanced session mode
- B. From Disk Management on Host1, select Rescan Disks
- C. From Virtual Machine Connection select Show Options and then select the USB hard drive.
- D. From Disk Management on Host1. attach a virtual hard disk.
- E. From Virtual Machine Connection, switch to a basic session.
Answer: A,C
NEW QUESTION # 69
Which three actions should you perform in sequence to meet the security requirements for Webapp1? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
1 - Configure the IIS application pool to run as Network Service.
2 - Create a group managed service account (gMSA) in Active Directory.
3 - Create the Key Distribution Services (KDS) root key in AD DS.
NEW QUESTION # 70
You have a server named Server1 that runs Windows Server.
You plan to host applications in Windows containers.
You need to configure Server1 to run containers.
What should you install?
- A. the Windows Subsystem for Linux
- B. Hyper-V
- C. Windows Admin Center
- D. Docker
Answer: D
Explanation:
https://learn.microsoft.com/en-us/virtualization/windowscontainers/quick-start/set-up- environment?tabs=dockerce#prerequisites
NEW QUESTION # 71
You have an on-premises Active Directory Domain Services (AD DS) domain that syncs with an Azure Active Directory (Azure AD) tenant The on-premises network is connected to Azure by using a Site-to-Site VPN. You have the DNS zones shown in the following table.
You need to ensure that names from (aDiifcam.com can be resolved from the on-premises network Which two actions should you perform? Each correct answer presents part of the solution, NOTE: Each correct selection Is worth one point
- A. Deploy an Azure virtual machine that runs Windows Server. Modify the DNS Servers settings for the virtual network.
- B. Create a secondary zone for fabnlcam.com on DO.
- C. Create a conditional forwarder for fabrikam.com on DC1.
- D. Create a stub zone for fabrikam.com on DC1.
- E. Deploy an Azure virtual machine that runs Windows Server. Configure the virtual machine &s a DNS forwarder.
Answer: C,E
Explanation:
Reference:
https://docs.microsoft.com/en-us/azure/private-link/private-endpoint-dns#on-premises-workloads-using-a-dns-forwarder
NEW QUESTION # 72
You have an on-premises server named Server1 that runs Windows Server and has internet connectivity.
You have an Azure subscription.
You need to monitor Server1 by using Azure Monitor.
Which resources should you create in the subscription, and what should you install on Server1? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/windows-server/manage/windows-admin-center/azure/azure-monitor
NEW QUESTION # 73
Your network contains an Active Directory Domain Services (AD DS) domain named contoso.com. The domain contains the VPN servers shown in the following table.
You have a server named NPS1 that has Network Policy Server (NPS) installed. NPS1 has the following RADIUS clients:
VPN1, VPN2, and VPN3 use NPS1 for RADIUS authentication. All the users in contoso.com are allowed to establish VPN connections. For each of the following statements, select Yes If the statement is true. Otherwise, select No. NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 74
You have an Azure subscription that contains the storage accounts shown in the following table.
In the West US Azure region, you create a storage sync service named SyncA.
You plan to create a sync group named GroupA.
What is the maximum number of cloud endpoints you can use with GroupA?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION # 75
You need to configure network communication between the Seattle and New York offices. The solution must meet the networking requirements.
What should you configure? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/azure/virtual-wan/virtual-wan-expressroute-portal
NEW QUESTION # 76
......
Why it is difficult to write the Microsoft AZ-800 Certification Exam
It is not easy to write the Microsoft AZ-800 Certification Exam. It is very difficult to write the Microsoft AZ-800 Certification Exam because the queries asked in the exam are very specific and unique. It is not possible to write the Microsoft AZ-800 Certification Exam without a thorough knowledge of the Microsoft products that are used in the exam. The questions in the Microsoft AZ-800 Certification Exam are very specific and unique. It is not possible to write the Microsoft AZ-800 Certification Exam without a thorough knowledge of the Microsoft products that are used in the exam. The questions in the Microsoft AZ-800 Certification Exam are very specific and unique. Domain controllers are an integral part of a Windows Server domain, and they play a major role in the proper functioning of a Windows Server condition.
Moreover, there is no shortcut or trick to pass the Microsoft AZ-800 Certification Exam. The Microsoft AZ-800 Certification Exam is a difficult and tough exam. To pass the Microsoft AZ-800 Certification Exam, you will need to prepare yourself with the Microsoft AZ-800 Certification Exam study material. Time management is very important in the Microsoft AZ-800 Certification Exam. As the time given for solving the AZ-800 Certification Exam will be limited, you will have to manage your time very well. Apps and services are vital to the functionality of a Windows Server environment. You will need to spend more time solving the Microsoft AZ-800 Certification Exam questions. It is possible to pass the Microsoft AZ-800 Certification Exam if you have the right guidance and preparation. AZ-800 exam dumps will give you the guidance you need to pass the Microsoft AZ-800 Certification Exam.
Download the Latest AZ-800 Dump - 2023 AZ-800 Exam Question Bank: https://testking.vcetorrent.com/AZ-800-valid-vce-torrent.html