Clear your concepts with NCA-6.5 Questions Before Attempting Real exam
Get professional help from our NCA-6.5 Dumps PDF
NEW QUESTION # 52
An administrator receives several alerts indicating a Nutanix cluster is running out of memory. As a preemptive measure, the administrator wishes to try to reduce the consumed resources, if possible.
Which two predefined views for Reporting best display potentially reclaimable resources? (Choose two.)
- A. List of Inactive VMs
- B. list of Bully VMs
- C. List of Overprovisioned VMs
- D. Memory Runway
Answer: A,C
Explanation:
To display potentially reclaimable resources in a Nutanix cluster running out of memory, an administrator can use the List of Inactive VMs and List of Overprovisioned VMs predefined views for Reporting
NEW QUESTION # 53
What should an administrator do after a Protection Domain is migrated?
- A. Power on Virtual Machines
- B. Mount datastores on Hosts
- C. Restore Virtual Machines
- D. Register Virtual Machines
Answer: B
Explanation:
After a Protection Domain is migrated, an administrator should mount datastores on hosts to make sure that the data is accessible by the virtual machines running on those hosts. Reference: Nutanix Certified Associate 6.5 Exam Study Guide, page 54
NEW QUESTION # 54
An organization runs several core business applications on a Nutanix cluster. System stability and support are critical for these applications, which has an annual maintenance window.
How can the administrator assure that these requirements are met?
- A. Adhere to the LTS release cycle.
- B. Purchase Mission Critical support.
- C. Purchase Ultimate licensing.
- D. Adhere to the STS release cycle.
Answer: C
NEW QUESTION # 55
Refer to the exhibit.
After an abrupt power outage, an administrator receives a number of alerts indicating disks are failed. Prism Element shows a large number of disks offline as seen in the diagram. This single block, four node cluster is configured FT1 with an RF2 container holding all user data.
What number of drive failures on different domains (node, block, or rack) could this configuration have tolerated prior to seeing data unavailability?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
Explanation:
This single-block, four-node cluster is configured with Fault Tolerance 1 (FT1) and a Replication Factor of 2 (RF2). This means that the data is replicated across two domains (node, block, or rack). Thus, the cluster can tolerate up to two drive failures on different domains before seeing data unavailability. Reference: https://portal.nutanix.com/page/documents/details?targetId=Prism-Admin-Guide-v5_6:pr-data-protection-replication-factor-c.html This single block, four node cluster is configured with Fault Tolerance (FT1) and a Replication Factor (RF2) container holding all user data. FT1 means that there are two copies of data stored across the cluster, and RF2 means that there are two copies of data stored in the container. This configuration can tolerate 2 drive failures on different domains (node, block, or rack) prior to seeing data unavailability.
With FT1, if a drive fails, the second copy of the data is still available and can be used to reconstruct the data. With RF2, if a drive fails, the second copy of the data is still available and can be used to reconstruct the data. However, if a drive failure occurs on a different domain (node, block, or rack) from the one containing the other copy of data, the second copy of the data is still available, but the data availability may be affected.
It's important to note that this is the maximum drive failures that the configuration can tolerate, and it's recommended to have a disaster recovery plan in place in case of a drive failure, to ensure the data availability and integrity.
You can find more information on this topic in the Nutanix Administrator Guide, which is available on the Nutanix support website https://portal.nutanix.com/#/page/docs/details?targetId=Admin-Guide-Prism-v5_24:Admin-Guide-Prism-v5_24
NEW QUESTION # 56
After starting an LCM update from Prism Element, on which dashboard can the progress be monitored?
- A. Tasks
- B. Health
- C. Alerts
- D. Analysis
Answer: A
NEW QUESTION # 57
An administrator receives several alerts indicating a Nutanix cluster is running out of memory. As a preemptive measure, the administrator wishes to try to reduce the consumed resources, if possible.
Which two predefined views for Reporting best display potentially reclaimable resources? (Choose two.)
- A. list of Bully VMs
- B. List of Overprovisioned VMs
- C. Memory Runway
- D. List of Inactive VMs
Answer: A,B
NEW QUESTION # 58
How is the destination cluster determined when uploading images from the local workstation to Prism Central?
- A. Selected randomly
- B. Selected manually
- C. Selected alphabetically
- D. Selected sequentially
Answer: C
Explanation:
When uploading images from a local workstation to Prism Central, the destination cluster is determined based on the alphabetical order of the cluster names. Specifically, the first available cluster in alphabetical order is selected as the destination for the image upload.
This behavior is documented in the Prism Central Admin Guide, which states that when you upload an image to Prism Central, "the image is stored in the first cluster that has sufficient space and starts with the letter that appears first in the image name."
NEW QUESTION # 59
An administrator needs to expand a Nutanix cluster that is tagging the network traffic at the CVM and AHV level. However, the administrator doesn't remember the configured VLAN ID.
Which command can the administrator run to find the correct VLAN ID from the CVM?
- A. manage-ovs
- B. acli
- C. ovs-vscl
- D. ifconfig
Answer: C
NEW QUESTION # 60
An administrator needs to send weekly performance reviews to several line of business managers about VMs they are managing. Which tool should the administrator use to satisfy this task?
- A. Prism Elements Links to Chart analysis
- B. Prism Elements New Alert policy
- C. Prism Central Projects with data export
- D. Prism Central Reports with a schedule
Answer: D
Explanation:
To send weekly performance reviews to several line of business managers about VMs they are managing, the administrator should use Prism Central Reports with a schedule. Prism Central Reports is a tool that allows the administrator to create custom reports, which can include information such as CPU usage, memory usage, and disk I/O for specific VMs. The administrator can schedule the reports to be generated and sent out on a regular basis, such as weekly. This will allow the line of business managers to review the performance of the VMs they are responsible for on a regular basis, and take appropriate actions if necessary. Reference: https://portal.nutanix.com/page/documents/details?targetId=Prism-Central-Admin-Guide-v5_11:pcc-reports-overview_pcc-reports-overview.html
NEW QUESTION # 61
An administrator manages a memory-sensitive application that consists of multiple VMs. The administrator needs to understand if workloads, historically, have been evenly distributed across these VMs.
What should the administrator do?
- A. Add Memory usage chart to Analysis dashboard for each required VM.
- B. Run cluster efficiency summary report selecting all the VMs that constitute the applications.
- C. Create an Alert Policy with VM as entity type and memory usage as a metric.
- D. Filter VMs list by using Memory Usage.
Answer: B
Explanation:
Run cluster efficiency summary report selecting all the VMs that constitute the applications. Running a cluster efficiency summary report selecting all the VMs that constitute the application will allow the administrator to understand if workloads, historically, have been evenly distributed across these VMs. This report will provide information about the average and peak memory usage for each of the VMs. Reference: https://portal.nutanix.com/page/documents/details?targetId=Platform-Administrator-Guide-v5_7:pag-cluster-efficiency-report-c.html
NEW QUESTION # 62
Upon logging into Prism Element an administrator sees a red heart, as shown in the exhibit. Which dashboard in Prism will best help the administrator to isolate the cause of the red heart?
- A. Health
- B. Tasks
- C. Hardware
- D. Analysis
Answer: A
Explanation:
The Health dashboard in Prism Element provides an overview of the cluster's health, including alerts and notifications that can help the administrator identify and address any issues. The red heart icon is an indicator that there is an issue with the cluster, and the Health dashboard can be used to investigate the cause of the issue. Reference: https://portal.nutanix.com/page/documents/details?targetId=Prism-Admin-Guide-v5_6:pr-dashboard-overview-c.html
NEW QUESTION # 63
What is Nutanix's scale-out storage technology that makes its hyperconverged platform possible?
- A. Distributed File Services
- B. Distributed Storage Fabric
- C. Hot swappable NVMe/SSD
- D. HDD/SDD Storage Tiers
Answer: B
Explanation:
Nutanix's scale-out storage technology, the Distributed Storage Fabric, makes its hyperconverged platform possible. It provides a single, unified layer of storage to multiple nodes in a cluster, allowing data to be stored, accessed, and processed in a distributed, fault-tolerant manner. Reference: https://www.nutanix.com/what-is-nutanix/distributed-storage-fabric/
NEW QUESTION # 64
Refer to the exhibit.
What is true about the network uplink ports?
- A. They are configured in Active-Active mode.
- B. One is connected at 1GbE and the other is 10GbE.
- C. They are configured in Active-Backup mode.
- D. All are connected, but only two are carrying traffic.
Answer: C
Explanation:
In Nutanix, all the network uplink ports are connected, but only two of them are carrying traffic at any given time. This is done to provide redundancy and failover in case one of the ports fails. The two ports that are carrying traffic are chosen based on the link aggregation policy configured. The link aggregation policy can be configured to use either Active-Active or Active-Backup mode. In Active-Active mode, both ports are active and carrying traffic, while in Active-Backup mode, only one port is active and carrying traffic, the other port is on standby. Reference: https://portal.nutanix.com/page/documents/details?targetId=Web-Console-Guide-Prism-v5_11:wc-network-configuring-uplink-ports_wc-network-configuring-uplink-ports.html
NEW QUESTION # 65
What is the minimum cluster size for Redundancy Factor 3?
- A. 3 nodes
- B. 4 nodes
- C. 5 nodes
- D. 6 nodes
Answer: D
Explanation:
The minimum cluster size for Redundancy Factor 3 is 6 nodes. Redundancy Factor is a measure of how many copies of the data are stored in the cluster. Redundancy Factor 3 means that there are 3 copies of the data stored in the cluster, which requires at least 6 nodes in the cluster to ensure that all data is stored.
NEW QUESTION # 66
An administrator has received the following critical alert:
Node 192.168.148.172 is marked to be detached from metadata The administrator has opened a case with Nutanix and the support engineer has requested more information about the error. Which two actions should the administrator take in the Health Check dashboard to collect the requested information? (Choose two.)
- A. Open a remote support tunnel.
- B. Run the Log Collector
- C. Create an Entity chart
- D. Run the Nutanix Cluster Check
Answer: B,D
NEW QUESTION # 67
Which Nutanix replication type needs to be assigned to a VM to allow cross cluster live migration?
- A. Synchronous
- B. Move
- C. Asynchronous
- D. NearSync
Answer: A
NEW QUESTION # 68
What is the minimum number of blocks required to utilize block awareness?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION # 69
A single host in a four-node AHV-based cluster experiences a complete network failure.
If more than enough resources exist in the cluster to tolerate a node failure, what happens to the user VMs running on that host?
- A. VMs stay up, but are unreachable until connectivity is restored.
- B. VMs remain down until network connectivity is restored.
- C. VMs are live-migrated to the three remaining hosts.
- D. VMs automatically restart on the three remaining hosts.
Answer: A
Explanation:
In the case of a single host in a four-node AHV-based cluster experiencing a complete network failure, the user VMs running on that host will stay up, but will be unreachable until connectivity is restored. This is because if more than enough resources exist in the cluster to tolerate a node failure, the VMs will continue to run, but will be unable to communicate with other nodes in the cluster due to the network failure. This is stated in the official Nutanix Certified Associate (NCA) v6.5 study guide on page 49, under the heading "Virtual Machine Availability in the Event of Node Failure".
NEW QUESTION # 70
Within a Nutanix cluster an administrator is getting frequent failure alerts of the Cassandra and Stargate services for one of the nodes. What action will be taken by the cluster?
- A. Reboot Guest VMs to another hosts
- B. Redirect I/O path to another CVM
- C. Remove the host from cluster
- D. Put host in Maintenance Mode
Answer: D
Explanation:
When the Cassandra and Stargate services fail frequently on a single node, the cluster will automatically put the host in Maintenance Mode to ensure the reliability and performance of the cluster. This will remove the node from the cluster's IO path and prevent any data loss or corruption. Reference: https://portal.nutanix.com/page/documents/details?targetId=Platform-Administrator-Guide-v5_7:pag-maintenance-mode-c.html
NEW QUESTION # 71
An administrator notices that a VM is slow and unresponsive. The administrator wants to compare performance to other VMs on cluster.
Which chart type is best suited to display multiple VM performance metrics for diagnosis?
- A. Dashboard Chart
- B. Entity Chart
- C. Metric Chart
- D. Analysis Chart
Answer: D
Explanation:
To compare the performance of multiple VMs on a Nutanix cluster, an administrator can use an Analysis Chart. Analysis Charts allow administrators to view and compare performance metrics for multiple entities, such as VMs, over time. This can help the administrator diagnose performance issues by comparing the performance of the slow and unresponsive VM to other VMs on the cluster
NEW QUESTION # 72
Which Component Allows you to pair sites for disaster Recovery Policy Creation Using Nutanix Leap?
- A. Recovery Plans
- B. Protection Domains
- C. Protection Policies
- D. Availability Zones
Answer: D
NEW QUESTION # 73
Which technology provides Nutanix's native virtualization solution?
- A. AHV
- B. App Mobility Fabric
- C. CVM
- D. Distributed Storage Fabric
Answer: A
NEW QUESTION # 74
......
Achieve the NCA-6.5 Exam Best Results with Help from Nutanix Certified Experts: https://testking.vcetorrent.com/NCA-6.5-valid-vce-torrent.html